Tenalisib

Catalog No.S8672 Batch:S867203

Print

Technical Data

Formula

C23H18FN5O2
Molecular Weight 415.42 CAS No. 1639417-53-0
Solubility (25°C)* In vitro DMSO 25 mg/mL (60.18 mM)
Ethanol 25 mg/mL (60.18 mM)
Water Insoluble
In vivo (Add solvents to the product individually and in order)
Clear solution
5%DMSO 40%PEG300 5%Tween80 50%ddH2O
0.625mg/ml Taking the 1 mL working solution as an example, add 50 μL of 12.5 mg/ml clarified DMSO stock solution to 400 μL of PEG300, mix evenly to clarify it; add 50 μL of Tween80 to the above system, mix evenly to clarify; then continue to add 500 μL of ddH2O to adjust the volume to 1 mL. The mixed solution should be used immediately for optimal results. 
Clear solution
5% DMSO 95% Corn oil
0.31mg/ml Taking the 1 mL working solution as an example, add 50 μL of 6.2 mg/ml clear DMSO stock solution to 950 μL of corn oil and mix evenly. The mixed solution should be used immediately for optimal results. 
* <1 mg/ml means slightly soluble or insoluble.
* Please note that Selleck tests the solubility of all compounds in-house, and the actual solubility may differ slightly from published values. This is normal and is due to slight batch-to-batch variations.
* Room temperature shipping (Stability testing shows this product can be shipped without any cooling measures.)

Preparing Stock Solutions

Biological Activity

Description Tenalisib is a potent and selective dual PI3Kδ/γ inhibitor with IC50 values of 24.5 nM and 33.2 nM for PI3Kδ and PI3Kγ, respectively. Its selectivity over α and β isoforms are more than 300-fold and 100-fold, respectively.
Targets
PI3Kδ [1]
(Cell-free assay)		 PI3Kγ [1]
(Cell-free assay)
24.5 nM 33.2 nM
In vitro RP6530 is a specific dual PI3K δ/γ inhibitor exhibiting several-fold selectivity against the other PI3K isoforms and 245-kinases. RP6530 causes a dose-dependent inhibition (>50% @ 2-7 μM) in growth of immortalized (Raji, TOLEDO, KG-1, JEKO, REC-1) B-cell lymphoma cells. Effect is more pronounced in the DLBCL cell lines, OCI-LY-1 and OCI-LY-10 (>50% inhibition @ 0.1-0.7 μM), and the reduction in viability is accompanied by corresponding inhibition of pAKT with EC50 of 6 & 70 nM respectively. Treatment of patient-derived primary cells with 4 µM RP6530 causes an increase in cell death. Cells in early apotosis (Annexin V+/PI-) are not different between the DMSO blank and RP6530 samples[1]. RP6530 shows potent inhibitory effect on cancer stem cells in ovarian cancer cell lines[2]. Treatment with 1 μM RP6530 results in G2/M arrest in MM-1S and MM-1R lines with very few cells in the SubG0 phase. It also results in a 70−90% inhibition of pAKT in MM-1S and MM-1R cell lines[3]. Potent modulation of inflammatory response by RP6530 contributes to control tumor microenvironment[1].
In vivo The predicted T1/2, Cmax, and AUC0-t at 10 mg dose in human are 9.5 h, 14.0 μM, and 342.0 μM respectively. RP6530 has an excellent pharmacokinetic profile with plasma concentrations reaching well above the EC75 at doses as low as 3 mg/kg in rat and dog for 6-12 h. In addition, RP6530 shows >70 and >100% oral bioavailability with a half-life of 2 and 3 h in rat and dog respectively[1].

Protocol (from reference)

Cell Assay:

[3]
  • Cell lines

    MM cell lines, namely, MM-1S and MM-1R

  • Concentrations

    1 μM

  • Incubation Time

    72 h

  • Method

    Potential of the combination (1 μM RP6530 + BORT between 0.1 nM and 1 μM) is studied in MM cell lines, namely, MM-1S and MM-1R. Proliferation is determined by a MTT assay after incubating with compound for 72 h at 37ºC. Apoptotic potential of the combination is estimated by AnnexinV/PI staining.

RETURN POLICY
Selleck Chemical’s Unconditional Return Policy ensures a smooth online shopping experience for our customers. If you are in any way unsatisfied with your purchase, you may return any item(s) within 7 days of receiving it. In the event of product quality issues, either protocol related or product related problems, you may return any item(s) within 365 days from the original purchase date. Please follow the instructions below when returning products.

SHIPPING AND STORAGE
Selleck products are transported at room temperature. If you receive the product at room temperature, please rest assured, the Selleck Quality Inspection Department has conducted experiments to verify that the normal temperature placement of one month will not affect the biological activity of powder products. After collecting, please store the product according to the requirements described in the datasheet. Most Selleck products are stable under the recommended conditions.

NOT FOR HUMAN, VETERINARY DIAGNOSTIC OR THERAPEUTIC USE.