TAK-659 Hydrochloride

Catalog No.S8442 Batch:S844201

Technical Data

Formula	C₁₇H₂₁FN₆ .HCl
Molecular Weight	380.85	CAS No.	1952251-28-3
Solubility (25°C)*	In vitro	Water	2 mg/mL (5.25 mM)
		DMSO	Insoluble
		Ethanol	Insoluble
* <1 mg/ml means slightly soluble or insoluble. * Please note that Selleck tests the solubility of all compounds in-house, and the actual solubility may differ slightly from published values. This is normal and is due to slight batch-to-batch variations. * Room temperature shipping (Stability testing shows this product can be shipped without any cooling measures.)

Preparing Stock Solutions

Biological Activity

Description

TAK-659 Hydrochloride is a potent and selective inhibitor of spleen tyrosine kinase (SYK) with an IC50 value of 3.2 nM. It is selective against most other kinases, but potent toward both SYK and FLT3.

Targets

Syk ^[1] (Cell-free assay)	FLT3 ^[1] (Cell-free assay)	ZAP-70 ^[1] (TR-FRET assays)	JAK3 ^[1] (Cell-free assay)	VEGFR2 ^[1] (Cell-free assay)
3.2 nM	4.6 nM	75 nM	114 nM	135 nM

In vitro

In a cell proliferation assay, TAK-659 shows inhibition toward a SYK-dependent cell line (OCI-LY10). the sensitivity to TAK-659 is associated with mutations impacting SYK activity in B cell lymphomas, whereas TAK-659 is not cytotoxic for adherent primary or solid tumor cell lines. In cell viability assays, TAK-659 is shown to be sensitive toward FLT3-ITD dependent cell lines, MV4-11 and MOLM-13 while the WT FLT3 RS4-11 (ALL cell line) and RA1 (Burkitt's Lymphoma cell line) are not sensitive toward TAK-659^[1]. In cultured human tumor cells, TAK-659 potently inhibits the growth of hematopoietic-derived cell lines, with a concentration producing half-maximal response (EC50) ranging from 11 to 775 nM in sensitive cell systems (eg, diffuse large B-cell lymphoma, and AML). In a broad kinase panel, TAK-659 demonstrates a more than 50-fold selectivity for SYK and FLT-3 over 290 other protein kinases^[2]. Treatment with TAK-659 inhibits Syk activation and BCR signaling in co-cultured primary CLL cells and Burkitt's lymphoma cells. In primary CLL cells in suspension culture, TAK-659 treatment results in a dose-dependent reduction in the phosphorylation of SykTyr525, Btk, NFκB, ERK1/2 and STAT3 after BCR stimulation. Inhibition of Syk by TAK-659 induces apoptosis of CLL cells and abrogates BCR and co-culture-derived survival signals. TAK-659 inhibits chemotaxis toward BMSC, CXCL12 and CXCL13 in primary CLL cells, and abrogates microenvironment-induced chemoresistance. TAK-659 does not inhibit TCR signaling and molecular features of T cell activation in primary T cells from patients with CLL^[3].

In vivo

TAK-659 blocks anti-IgD (immune-globulin D antibody) stimulated CD86 expression in mouse peripheral B cells in vivo. In the FLT3-dependent MV4-11 xenograft model, TAK-659 shows tumor regression at 60 mg/kg daily after 20 days of dosing^[1]. Preliminary plasma and urine PK data show that TAK-659 was absorbed quickly (median Tmax 2-3 hrs), with moderate variability in steady-state exposures (40-50% CV for DN-AUCtau), mean peak/trough ratio of 3.2–4.2, and mean accumulation of 2.1- to 2.6-fold after 15 d QD dosing. Renal clearance (CLr) of unchanged drug accounts for 30–34% of apparent oral clearance, suggesting a CLr contribution of ≥30–34% to TAK-659 systemic clearance. Oral TAK-659 has an acceptable PK and safety profile in pts with solid tumors or lymphoma, supporting continuous oral QD dosing^[4].

Protocol (from reference)

Cell Assay:^{^[1]}	Cell lines FLT3-dependent cell lines (MV4-11 and MOLM-13) Concentrations -- Incubation Time 72 or 96 hours Method Cells are maintained at 37°C in a humidified atmosphere containing 5-8% CO2. In a panel of hematological and solid tumor cell lines, inhibition of cell viability is determined using the soluble tetrazolium salt, MTS. Cells are seeded in 96-well tissue culture plates and are incubated at 37°C/5% CO2 for 24 hours prior to addition of compounds or DMSO vehicle. After 72 or 96 hours of incubation with compounds, MTS conversion by metabolically active cells is determined by measuring the OD490 nm of the wells using a Thermomax microplate reader. To generate concentration-response curves, cells are treated in duplicate with a range of serial compound dilutions. Prior to addition to cells, compound dilutions are prepared in DMSO. Equal amounts of DMSO are added to cells (final concentration is 0.5%). After background correction and normalization against DMSO-treated cells, EC50 values are calculated by curve-fitting these cell viability results using nonlinear regression analysis.
Animal Study:^{^[1]}	Animal Models Athymic nude mice Dosages 10, 30, 60 mg/kg QD Administration by oral gavage

Cell Assay:^{^[1]}

Cell lines
FLT3-dependent cell lines (MV4-11 and MOLM-13)
Concentrations
--
Incubation Time
72 or 96 hours
Method
Cells are maintained at 37°C in a humidified atmosphere containing 5-8% CO2. In a panel of hematological and solid tumor cell lines, inhibition of cell viability is determined using the soluble tetrazolium salt, MTS. Cells are seeded in 96-well tissue culture plates and are incubated at 37°C/5% CO2 for 24 hours prior to addition of compounds or DMSO vehicle. After 72 or 96 hours of incubation with compounds, MTS conversion by metabolically active cells is determined by measuring the OD490 nm of the wells using a Thermomax microplate reader. To generate concentration-response curves, cells are treated in duplicate with a range of serial compound dilutions. Prior to addition to cells, compound dilutions are prepared in DMSO. Equal amounts of DMSO are added to cells (final concentration is 0.5%). After background correction and normalization against DMSO-treated cells, EC50 values are calculated by curve-fitting these cell viability results using nonlinear regression analysis.

Animal Study:^{^[1]}

Animal Models
Athymic nude mice
Dosages
10, 30, 60 mg/kg QD
Administration
by oral gavage

References

[4] Jason B Kaplan, et al. 58th Annual Meeting & Exposition. 2016.

+ Expand

Selleck's TAK-659 Hydrochloride has been cited by 5 publications

Characterization of the Immune-Modulating Properties of Different β-Glucans on Myeloid Dendritic Cells [ Int J Mol Sci, 2024, 25(18)9914]	PubMed: 39337403
Heterogeneity of Patient-Derived Acute Myeloid Leukemia Cells Subjected to SYK In Vitro Inhibition [ Int J Mol Sci, 2022, 23(23)14706]	PubMed: 36499034
Assessment of the effects of Syk and BTK inhibitors on GPVI-mediated platelet signaling and function [ Am J Physiol Cell Physiol, 2021, 320(5):C902-C915]	PubMed: 33689480
Effects of Inhibitors against Syk-BTK-PI3K Signaling on Platelet Function [ ScholarsArchive@OSU, 2020, 51]	PubMed: N/A
Effects of Inhibitors against Syk-BTK-PI3K Signaling on Platelet Function [ ScholarsArchive@OSU, 2020, None]	PubMed: None

RETURN POLICY
Selleck Chemical’s Unconditional Return Policy ensures a smooth online shopping experience for our customers. If you are in any way unsatisfied with your purchase, you may return any item(s) within 7 days of receiving it. In the event of product quality issues, either protocol related or product related problems, you may return any item(s) within 365 days from the original purchase date. Please follow the instructions below when returning products.

SHIPPING AND STORAGE
Selleck products are transported at room temperature. If you receive the product at room temperature, please rest assured, the Selleck Quality Inspection Department has conducted experiments to verify that the normal temperature placement of one month will not affect the biological activity of powder products. After collecting, please store the product according to the requirements described in the datasheet. Most Selleck products are stable under the recommended conditions.

NOT FOR HUMAN, VETERINARY DIAGNOSTIC OR THERAPEUTIC USE.