Enalaprilat Dihydrate

Catalog No.S1657 Batch:S165702

Print

Technical Data

Formula

C18H24N2O5.2H2O
Molecular Weight 348.4 CAS No. 84680-54-6
Solubility (25°C)* In vitro DMSO 70 mg/mL (200.91 mM)
Water 5 mg/mL (14.35 mM)
Ethanol Insoluble
* <1 mg/ml means slightly soluble or insoluble.
* Please note that Selleck tests the solubility of all compounds in-house, and the actual solubility may differ slightly from published values. This is normal and is due to slight batch-to-batch variations.
* Room temperature shipping (Stability testing shows this product can be shipped without any cooling measures.)

Preparing Stock Solutions

Biological Activity

Description Enalaprilat (MK-422) is an angiotensin-converting enzyme (ACE) inhibitor with IC50 of 1.94 nM.
Targets
ACE [1]
1.94 nM
In vitro Enalaprilat has high affinity for human endothelial ACE with IC50 of 1.94 nM in vitro binding assay by displacing a saturating concentration of [125I]351A, a radiolabeled lisinopril analogue from ACE binding sites, and shows bradykinin/angiotensin I selectivity ratio of 1.00 calculated from double displacement experiments. [1] Enalaprilat has the strong inhibitory effect on Aβ42-to-Aβ40-converting activity found in the N-domain of ACE, exhibiting a 10-fold lower IC50 (0.003~0.01 μM) than captopril (0.03~0.1 μM). [2] Enalaprilat (100 nM) blocks protein kinase C epsilon by directly activating bradykinin B1 receptor at the canonical Zn2+ binding site, leading to prolonged nitric oxide (NO) production in cytokine-treated human lung microvascular endothelial cells. [3] Enalaprilat attenuates the IGF-I induced neonatal rat cardiac fibroblast growth (30% reduction) in a concentration-dependent fashion, with IC50 of 90 mM. [4]
In vivo Enalaprilat has unfavourable ionisation characteristics to allow sufficient potency for oral administration, thus Enalaprilat is only suitable for intravenous administration, which is overcome by the esterification with ethanol to produce Enalapril. Administration of Enalaprilat induces a significant reduction of MAP at 70 minutes compared with the placebo group during haemorrhagic shock in rats, and results in a 50% reduction of CO, a general tendency of EB extravasation which is significant in the kidney and lungs, and a significant increase in ileal EB extravasation (53%). [5] Enalaprilat has no effect in nonhypertrophied hearts, but significantly attenuates the greater increase in left ventricular end-diastolic pressure in hypertrophied hearts compared with no drug. [6]
Features The 1st dicarboxylate-containing ACE inhibitor developed to overcome captopril limitations.

Protocol (from reference)

Kinase Assay:[1]
  • Single displacement binding assay

    The binding assay is based on the competitive displacement of [125I]351A by Enalaprilat performed on whole endothelial cells. Subconfluent HUVECs in 6-well plates are rinsed with 2 mL binding buffer (140 mM NaCl, 2.7 mM KCl, 1.8 mM CaCl2, 1.03 mM MgCl2, 0.42 mM NaH2PO4, 10 mM HEPES, 2 mM sodium pyruvate and 5 mM glucose, pH 7.4), and the culture medium is replaced with 2.5 mL fresh binding buffer containing 5% fetal bovine serum (FBS). The Enalaprilat (2.5-12.5 μL, 0.1-50 nM) or equivalent volumes of diluent are added to the binding buffer. A saturating amount of [125I]351A (10 μL, typically 106 cpm) is then added to each sample and the plates are incubated at 37 °C for 2 hours in a thermostatic bath. The cells are then rinsed twice with 1.5 mL binding buffer. Finally, the cells are extracted with 0.5 mL NaOH 1 N, incubated for 5 minutes, and the radioactivity is counted with a gamma counter. The ratio of specific [125I]351A bound to total bound activity (B/B0) is calculated, and the inhibitory potency of Enalaprilat expressed as the concentration of ACE inhibitors able to displace 50% of the bound radioligand, i.e. the IC50.
Cell Assay:[4]
  • Cell lines

    Rat cardiac fibroblasts cell lines

  • Concentrations

    Dissolved in DMSO, final concentrations 1 nM - 10 μM

  • Incubation Time

    24 hours

  • Method

    After 24 hours incubation in serum-free medium (DMEM), cells are stimulated with IGF-I (1-100 nM) and coincubated with Enalaprilat (1 nM-10 μM) for 24 hours. Cellular proliferation is assessed by 5-bromo-2'-deoxyuridine (BrdU) incorporation during the last 4 hours of the 24 hours incubation period using a colorimetric immunoassay. The extinctions are measured at 450 nm in an ELISA plate reader. All values consist of an n=9.
Animal Study:[5]
  • Animal Models

    Male Sprague–Dawley rats

  • Dosages

    1 mg/kg

  • Administration

    I.V. bolus

Selleck's Enalaprilat Dihydrate has been cited by 5 publications

Pulmonary midkine inhibition ameliorates sepsis induced lung injury [ J Transl Med, 2021, 19(1):91] PubMed: 33639987
Establishment of a Drug Screening Model for Cardiac Complications of Acute Renal Failure [ Biomolecules, 2021, 11(9)1370] PubMed: 34572583
Functional Study of Carboxylesterase 1 Protein Isoforms. [ Proteomics, 2019, 19(4):e1800288] PubMed: 30520264
A Comprehensive Functional Assessment of Carboxylesterase 1 Nonsynonymous Polymorphisms. [ Drug Metab Dispos, 2017, 45(11):1149-1155] PubMed: 28838926
Sacubitril Is Selectively Activated by Carboxylesterase 1 (CES1) in the Liver and the Activation Is Affected by CES1 Genetic Variation. [ Drug Metab Dispos, 2016, 44(4):554-9] PubMed: 26817948

RETURN POLICY
Selleck Chemical’s Unconditional Return Policy ensures a smooth online shopping experience for our customers. If you are in any way unsatisfied with your purchase, you may return any item(s) within 7 days of receiving it. In the event of product quality issues, either protocol related or product related problems, you may return any item(s) within 365 days from the original purchase date. Please follow the instructions below when returning products.

SHIPPING AND STORAGE
Selleck products are transported at room temperature. If you receive the product at room temperature, please rest assured, the Selleck Quality Inspection Department has conducted experiments to verify that the normal temperature placement of one month will not affect the biological activity of powder products. After collecting, please store the product according to the requirements described in the datasheet. Most Selleck products are stable under the recommended conditions.

NOT FOR HUMAN, VETERINARY DIAGNOSTIC OR THERAPEUTIC USE.